Philips CDI 601 User Manual page 3

This product was designed and manufactured to meet strict
quality and safety standards.
installation and operation
particularly aware of.
Read Instructions - All the safety and operating instructions
1.
should be read before the appliance is operated.
2. Retain Instructions - The safety and operating instructions
should be retained for future reference.
3. Heed Warnings - All warnings on the appliance and in the
operating instructions should be adhered to.
4. Follow Instructions - All operating and use instructions should
be followed.
5. Cleaning - Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners. Use
a damp cloth for cleaning.
6. Attachments - Do not use attachments not recommended
by the product manufacturer as they may cause hazards.
7. Water and Moisture - Do not use this product near water
for example, near a bath tub, wash bowl, kitchen sink, or
laundry tub, in a wet basement, or near a swimming pool,
and the like.
8. Accessories - Do not place this product on an unstable cart,
stand, tripod, bracket, or table. The product may fall, causing
serious injury to a child or adult, and serious damage to the
appliance. Use only with a cart, stand, tripod, bracket, or
table recommended by the manufacturer, or sold with the
product. Any mounting of the appliance should follow the
manufacturer's instructions, and should use a mounting
accessory recommended by the manufacturer.
9. Ventilation - Slots and openings in the cabinet are provided
for ventilation an to ensure reliable operation of the product
and to protect it from overheating, and these openings must
not be blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug, or other
similar surface. This product should never be placed near
or over a radiator or heat register. This product should not
be placed in a built-in installation such as a bookcase or
rack unless proper
manufacturer's instructions have been adhered to.
10. Power Sources - This product should be operated only from
the type of power source indicated on the marking label. If
you are not sure of the type of power supply to your home,
consult your appliance dealer or local power company. For
products intended to operate from battery power, or other
sources, refer to the operating instructions.
LMP O RTA NT S A
READ BEFORE OPERATING EQUIPMENT
There are, however,
precautions wich you should be
ventilation is provided or
FEGUAR
11. Grounding or Polarization - This product is equipped with a
some
3 wire grounding type plug, a plug having a third (grounding)
pin. This plug will only fit into a grounding type power outlet.
This is a safety feature. If you are unable to insert the plug
fully into the outlet contact your electrician to replace your
obsolete outlet. Do not defeat the safety purpose of the
grounding type plug.
12. Power-Cord Protection
routed so that they are not likely to be walked on or pinched
by items placed upon or against them, paying particular
attention to cords at plugs, convenience receptacles, and
the point where they exit from the appiiance.
13. If an extension cord is used with this product, make sure that
the total of amperage ratings of the products plugged into
the extension cord do not exceed the extension
amperage rating. Also make sure that the total of all products
plugged into the wall outlet does not exceed 15 amperes.
14. Object and Liquid Entry - Never push objects of any kind
into this product through openings as they may touch
dangerous voltage points or short-out parts that could result
in a fire or electric shock. Never spill liquid of any kind on
the product.
15. Servicing - Do not attempt to service this product yourself
as opening
dangerous voltage or other hazards. Refer all servicing to
qualified service personnel.
16. Damage Requiring Service - Unplug this product from the
wall outlet and refer servicing to qualified service personnel
under the following conditions:
a. When the power-supply cord or plug is damaged.
b.
If liquid has been spilled, or objects have fallen into the
product.
C. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the
operating instructions. Adjust only those controls that are
covered by the operating
adjustment of other controls may result in damage and will
the often require extensive work by a qualified technician to
restore the product to its normal operation.
e. If the product has been dropped or the cabinet has been
damaged.
f. When the product exhibits a distinct change in performance
- this indicates a need for service.
DS
Power-supply cords should be
or removing covers may
instructions as an improper
cord
expose you to