Sound Settings - Boss Audio Systems ELITE HARLEY-DAVIDSON BEHDX98 User Manual

Sound Settings

This section helps you change the sound settings of this unit.
Sound Mode and Equalizer Setting
1.
Press and hold
2.
Navigate to [AUDIO] > [13 BAND EQ].
• To select a preset sound mode (FLAT, ROCK, CLASSIC, ACOUSTIC, DANCE, ELECTRONIC, HIP HOP),
rotate the function knob.
• To customize equalizer settings, rotate the function
knob to select [CUSTOM] then press the function knob
to access the 13-band graphic equalizer settings.
Rotate the function knob to adjust decibel output in
each frequency band and press the function knob to
confirm.
Experiment your settings until optimal result is found.
Crossover Frequency Setting
1.
Press and hold
2.
Navigate to [AUDIO] > [CROSSOVER].
3.
To set crossover frequencies for front speakers, rear
speakers and subwoofer, rotate the function knob
to select [FRONT], [REAR] and [SUBWOOFER]
respectively then press the function knob to confirm.
To return to the previous option level, press
.
• [HPF] (for front and rear speakers): Adjust High
Pass Filter (HPF) for main audio (radio and media
play). Only the frequencies above the one you set
will be received to reproduce sound.
• [SLOPE] (for front and rear speakers): Set a high pass filter slope in decibels. An HPF slope determines
the rate that attenuates the frequencies below the set one.
• [LPF] (for subwoofer): Adjust Low Pass Filter (LPF) for main audio (radio and media play). Only the
frequencies below the one you set will be received to reproduce sound.
• [SLOPE] (for subwoofer): Set a low pass filter slope in decibels. A LPF slope determines the rate that
attenuates the frequencies above the set one.
to display system settings.
to display system settings.
/
- 14 -