Screen Illumination Control; Use Front/Rear Camera; Audio Settings - Boss Audio Systems MGV500B User Manual

Screen Illumination Control

The unit comes with an illumination wire which is used for screen illumination control.
1.
Connect the orange/black wire (marked "ILL") from the unit to your vehicle lights. When
the vehicle lights are on, the unit's screen will be automatically illuminated.

Use Front/Rear Camera

WARNING: Never rely solely on the rear view camera when reversing your vehicle. Always
check your surroundings before reversing your vehicle.
1.
Connect a front/rear camera (not included) to the unit. See the installation manual of
your camera for more details.
• Video signal input
- Display live view from the front camera using the "FRONT CAMERA INPUT" wire.
- Display live view from the rear camera using the "REAR CAMERA INPUT" wire.
• Power supply to the camera
- Power the front camera using the "POWER ANTENNA" wire.
- Power the rear camera using the "REAR CAMERA" wire.
• Reverse trigger signal
- Switch on the camera only when the vehicle is put in reverse gear, when using the
"REVERSE INPUT" wire.
2.
Switch the unit to front or rear camera mode.
a.
Press MODE to access the mode options.
b.
When the options bar is displayed, rotate the function knob to select "F-CAM" (front
camera) or "R-CAM" (rear camera) and press the function knob or SEL to confirm.

Audio Settings

This section helps you change the sound settings of this unit.
1.
In power on mode, press briefly SEL to access the audio setup options.
2.
When a menu option is displayed, rotate the function knob to adjust values or settings.
The settings will be made after three seconds of button inactivity, then the menu option
will automatically exit.
13