De-Register A Handset Or A Base - Uniden AMWUC511 Owner's Manual

UC504DH(DECT160-2) OM 8/17/06
If the base already has the maximum number of
handsets (6) registered to it you will need to de-
register one of the existing handsets before you
can register the new handset.
See section for de-registering handsets.
On the handset you want to register:
Enter the base PIN code.
Pre-set base PIN code is 0000.
You will hear a confirmation tone when
registration is complete.
When in standby, the new handset number will be
displayed.
The handset will automatically be allocated with
the next available handset number.
If registration is unsuccessful, the display will
Not Registered
show and you will need to
follow the registration procedure again.
3:38 PM Page 28

De-register a handset or a base

If you have more than one handset registered to
your base or more than one base registered to your
handset(s), you can de-register both the handset
from the base or the base from the handset.
Before registering, make sure all handsets and the
base are in standby.
1 Press to access the main menu.
2 Press or
displayed and press
3 Press or
and press .
4 Press or
Base and press
5 Press or
base you want to de-register and press
6 Press or
If the handset registers to the base successfully,
you will hear a confirmation tone.
7 Press to exit and return to standby.
[28]
until Add. Settings is
.
to display Deregister
to select Handset or
.
to display the handset or
.
to select Yes and press .