Table of Contents
Advertisement
PLEASE READ THIS IMPORTANT INFORMATION:
CD mechanisms used in devices like this are designed to read all commercial CDs. It will also read
self-compiled CD-R/CD-RW discs, but it may take up to 10 seconds for the actual playback to
begin. If playback does not start, it is likely due to the quality of the CD-R/RW disc and/or the
compatibility of the CD compilation software. The manufacturer is not responsible for the playback
quality of CD-R/RW discs.
-
Do not attach a label or seal to either side of the CD-R/RW disc. It may cause a malfunction.
-
Due to the numerous different file systems and file formats, connected USB memory sticks
cannot be guaranteed to function.
-
Supported file systems are FAT16 and FAT32. The supported file format is MP3.
PLAYING A CD
1.
Press the STANDBY-ON
2.
Tap the FOUNCTION Button on remote control or main unit to select CD mode and then
press the Open the disc compartment.
3.
Place an audio CD on the cen ter sp indl e with its label side facing out towards the
CD DOOR . Close the disc compartment.
Unit starts to read the disc, "- -" shows in display. After few seconds, the total number of tracks
4.
show one second and then total time of the CD will be shown on the LCD DISPLAY
5.
Press the PLAY/PAUSE
display, the CD will start playing from first track.
6.
Press the volume control VOLUME+/- Button on main unit or remote control
desired volume level.
To pause playback, press the PLAY/PAUSE
7.
track time will be paused and PAUSE indicator
the CD PLAY/PAUSE
8.
You can choose to play your favorite track directly by pressing either the SKIP NEXT
Button or SKIP PREVIOUS
selected.
9.
To locate a particular section within a track, press and hold the
section is found. Release the button to continue playing your selection.
10. To stop playing, press the STOP
11. Turn off the JBS-300 when you are done listening.
SKIP AND SEARCH MODE
1. During Play or Pause mode, tap the SKIP NEXT
to the next track or go back to the beginning of the current track.
2. During playback, press and hold the
audible high speed playback.
CONNECTING USB DEVICES
USB memory sticks can be connected to the USB port. This enables music tracks to be played
from a USB memory stick. The USB port does not support video playback. Plug a USB device
into the USB port.
FOLDER SELECTION
If you are playing MP3 files, you can store them in different folders to make it easier to keep an
overview of the tracks.
Press either the FOLDER- button or FOLDER+ button to change folder on an MP3 data medium.
DIFFERENT PLAY MODES (REMOTE CONTROL ONLY)
Press the PLAY MODE Button on remote control repeatedly to select different of play modes
when CD or MP3 CD is playing.
CD/USB PLAYER OPERATION
Button on main unit or remote control to turn on the unit.
Button on main unit or remote control, PLAY indicator
Button again.
Button. The LCD Display will indicate the correct track number
Button.
or
E-13
Button on main unit or remote control. The
will show in display. To resume playing, press
or SKIP PREVIOUS
Button to search within the current track with
shows in
to adjust to the
Button until the
or
Button to go
Advertisement
Table of Contents
