Table of Contents
Advertisement
After selecting your favorite song, press PLAY/PAUSE
5.
control to play or pause the song.
6.
Press the volume control on main unit or remote control
7.
Press
or
8.
If you want to pair the JBS-300 with another Bluetooth enabled device, press and
PAIR Button for 3 seconds or turn off the Bluetooth function of device
JBS-300 then repeat step 3 above.
Notes:
1.) Refer to the manual of your cell phone, tablet PC, computer or other Bluetooth enabled
devices for Bluetooth operation since it may vary from model to model.
2.) If your Bluetooth enabled device does not support A2DP profile, it will not play the music
through the speaker, even if paired (linked).
3.) If you are pairing (linking) your computer to the unit using Bluetooth, you may need to set the
speaker as your computer's default sound device.
This unit features an auxiliary audio signal input jack for connecting external audio devices like
MP3 players, Digital Audio Device and listen to them through the speakers of this unit.
1.
Use an audio cable (not included) with one 3.5 mm stereo plug on each end of the cable.
Plug one end into the AUDIO IN JACK on main unit and the other end of the cable into the
2.
Line-out Jack or Headphone Jack of your external audio device.
3.
Turn on the unit and external audio device.
4.
Tap the FOUCTION Button on main or remote control to select AUX mode, "AUDIO IN" icon
turns on, display shows "AUDIO IN " message.
5.
The volume level can now be controlled through the main unit. Operate all other functions on
the auxiliary device as usual.
Note:
If you connect this unit to the Line-Out Jack of your external device then you only need to
adjust the volume control of this unit. If you connect the Headphone Jack of your external
device then you may need to adjust both the volume controls of your external device and this
unit to obtain the desirable volume setting.
Press the STANDBY-ON
you have finished listening. Don't forget to switch off the power of your external device as well.
This unit provides 4 different EQ modes to enhance your listening experience. You can select the
desired effect by pressing the EQ Button on remote control repeatedly at following sequence:
Press the MUTE Button on remote control to mute the sound output from the speaker
temporarily. The "MUTE" icon will appear in display.
Press the MUTE Button again or VOLUME+/- Button to resume to normal speaker playback.
X-BASS BUTTON (REMOTE CONTROL ONLY)
Press the X-BASS button on remote control if you want to enhance the bass when listening to the
system, "X-BASS" icon will appear in display. Press the button again to turn off extra bass effect,
"X-BASS" icon will disappear in display.
SLEEP OPERATIONS (REMOTE CONTROL ONLY)
The sleep timer allows you to turn the unit off after a designated time is reached.
Button on main unit or remote control to skip to previous or next song.
AUXILIARY INPUT OPERATION
Button on main unit or remote control to turn off the unit when
PRESET EQ (REMOTE CONTROL ONLY)
ROCK CLASSIC POPS JAZZ OFF
MUTE BUTTON (REMOTE CONTROL ONLY)
to adjust to the desired volume level.
E-15
Button on the unit or remote
currently paired with
hold the
Advertisement
Table of Contents
