Radio Mode; Usb Mode - Jensen JMS32 Owner's Manual

Radio Mode

USA/Europe (EURO) Tuning Mode Selection
To change from USA to European tuning mode, perform the following steps:
1. Press and hold the
2. Press the button (8) repeatedly to cycle through the menu options (DIM > DIM LEVEL > REGION > PRE VOL >
RESET). The Region setting will display REG USA (if set to USA frequency tuning mode) or REG EUR (if set to European
frequency mode).
3. With the display showing the current tuning mode, Press the
REG EUR).
Frequency Tuning
Press the or buttons (5, 7) to fine tune the radio frequency.
Channel Seek
Press and hold the or
Preset Channel Store
To manually store a favourite channel to one of the twelve preset channels, perform the following steps:
1. Press the or
2. Press and hole the favourite
flashing on display.
3. Press the button (9) repeatedly to select desired favourite preset channel number (1-12).
4. Press the button (6) to save the station to the chosen preset channel and exit preset channel list, the favourite icon will
stop flashing.
Auto Store
Press and hold the button (3) to access the tuner menu list (AUTO STORE & PRESET SCAN). Press
repeatedly until "AUTO STR" appears on the display. Press the
strongest stations to the preset tuning channels.
NOTE: Only stations detected with sufficient signal strength will be stored in the preset channel automatically.
Preset Scan
Press and hold the button (3) to access the tuner menu list (AUTO STORE & PRESET SCAN). Press
repeatedly until "PRE SCAN" appears on the display. Press the
strongest stations to the preset tuning channels.
Favourite Preset Channel select
Press the button (9) to select available preset channels.

USB Mode

Insert/Remove USB Device
You can connect a USB device directly to the USB interface at the rear of the radio for playback of compatible files. Playback
begins automatically.
Press the button (3) to switch to USB mode from another source.
Play/Pause (USB)
During USB playback, press the
Next/Previous File
Press the or button (5, 7) to select the previous or next track.
Track Select
1. Press and hold the
2. Press the volume
3. Press button (6) to confirm to playback the track selected.
Fast Forward/Fast Reverse
Press and hold the or
button (8) for 3 seconds to access the system menu.
buttons (5, 7) to seek strong radio frequencies.
buttons (5, 7) to tune to the radio frequency you want to store.
button (9) to access 12 presets channel list; the favourite icon & channel
button (6) to play or pause the selected track.
buttons (9) to access the MP3/WMA track navigate mode.
or button (10, 2) to select the desire track.
button (5, 7) to fast forward or fast reverse.
or buttons (5, 7) to change between (REG USA /
button (6) to begin the Auto Store function and store the
button (6) to begin the Preset Scan function and listen the
6
JMS32
will be
button (3)
button (3)