Table of Contents
Advertisement
Installing the touchpad
1. Place the touchpad board into the slot.
2. Replace the four M2L2 screws to secure the touchpad board to the computer.
3. Replace the two M2L3 screws to secure the touchpad support bracket to the touchpad board.
4. Replace the conductive tapes.
5. Replace the M2L3 screw to secure the screw support bracket to the computer.
6. Install the:
a.
system board
b.
system fan
c.
heat sink
d.
speaker
e.
memory module
f.
WLAN Card
g.
hard drive assembly
h.
base cover
i.
keyboard
j.
optical drive
k.
battery
7. Follow the procedure in
Palm rest
Replacing the palmrest
1. Follow the procedure in
2. Remove the:
a.
battery
b.
optical drive
c.
keyboard
d.
base cover
e.
hard drive assembly
f.
WLAN card
g.
memory module
h.
power button board
i.
heat sink
j.
system fan
k.
speaker
l.
I/O board
m.
power connector port
n.
system board
o.
display assembly
NOTE:
The component you are left with is the palmrest.
48
Disassembly and reassembly
After working inside your
Before working inside your
computer.
computer.
Advertisement
Table of Contents
