Dell Vostro 15-3568 Owner's Manual page 68

Table 7. General tab
Option Description
System Information This section lists the primary hardware features of your computer.
● System Information: Displays BIOS Version, Service Tag, Asset Tag, Ownership Tag, Ownership
● Memory Information: Displays Memory Installed, Memory Available, Memory Speed, Memory
● Processor Information: Displays Processor Type, Core Count, Processor ID, Current Clock Speed,
● Device Information: Displays Primary Hard Drive, ODD Device, LOM MAC Address, Video Controller,
Battery Information Displays the battery status and the type of AC adapter connected to the computer.
Boot Sequence Boot Sequence
Boot List Option
Advanced Boot This option allows you the legacy option ROMs to load. By default, the Enable Legacy Option ROMs is
Options enabled.
Date/Time Allows you to change the date and time.
Table 8. System Configuration
Option
Integrated NIC
SATA Operation
Drives
SMART Reporting
USB Configuration
68 System setup
Date, Manufacture Date, and the Express Service Code.
Channels Mode, Memory Technology, DIMM A Size, DIMM B Size,
Minimum Clock Speed, Maximum Clock Speed, Processor L2 Cache, Processor L3 Cache, HT
Capable, and 64-Bit Technology.
Video BIOS Version, Video Memory, Panel Type, Native Resolution, Audio Controller, Wi-Fi Device,
Bluetooth Device.
Description
Allows you to configure the integrated network controller. The options are:
● Disabled
● Enabled
● Enabled w/PXE: This option is enabled by default.
Allows you to configure the internal SATA hard-drive controller. The options are:
● Disabled
● AHCI: This option is enabled by default.
Allows you to configure the SATA drives on board. All drives are enabled by default. The
options are:
● SATA-0: This option is selected by default.
● SATA-1: This option is selected by default.
This field controls whether hard drive errors for integrated drives are reported during
system startup. This technology is part of the SMART (Self-Monitoring Analysis and
Reporting Technology) specification. This option is disabled by default.
● Enable SMART Reporting
This field configures the integrated USB controller. If Boot Support is enabled, the
system is allowed to boot any type of USB Mass Storage Devices (HDD, memory key,
floppy).
If USB port is enabled, device attached to this port is enabled and available for OS.
Allows you to change the order in which the
computer attempts to find an operating system.
The option is:
● Windows Boot Manager
By default, all the options are checked. You can
also deselect any option or change the boot order.
Allows you to change the boot list option.
● Legacy
● UEFI