Replacing the antenna
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Adhere the antennas to the slot on the display-assembly base.
2
Replace the two screws (M2x2.5) that secure antennas to the display-assembly
base.
3
Route the antenna cables through the routing guides on the display-assembly
base.
Post-requisites
1
Replace the
wireless
2
Replace the
system-board
3
Replace the
back
4
Replace the stand.
38
computer. After working inside your computer, follow
After working inside your
card.
shield.
cover.
computer. For more safety best
www.dell.com/
Before