4
Open the latch, and disconnect the media-card reader cable from the system
board.
5
Disconnect the speaker cable from the system board.
6
Open the latch, and disconnect the power-button board cable from the system
board.
7
Disconnect the display-backlight cable from the system board.
8
Peel off the tape that secures the display cable from the connector on the
system board.
9
Using your finger tips, push the securing clips on the display cable inwards and
disconnect it from the system board.
10 Remove the six screws (M3x5) that secure the system board to the display-
assembly base.
69