ZyXEL Communications VES-1616 Support Notes page 88

ZyXEL
code for IP is 0800, ARP is 0806.
Click Save/Apply button to save and finish the process of creating a new network
traffic class rule.
Repeat the above steps to create the classification rule for PPPoE, IPoE and
VoIP.
In this case, we will fix the VoIP service at the Ethernet port 4 and remaining ports
for other services. Therefore we will need use CLI command to configure the port
based VLAN setting which will combine all traffic from the Ethernet port 4 of
P-870H-51 with the VLAN ID 201. To make sure the CLI command works properly,
we need to make sure the order of rule for the VLAN 201 is 1. This should help us
to make sure the CLI command can map to the correct WAN interface with correct
VLAN ID.
Click the Save/Apply button at the QoS classification page to save and finish all
the settings related to WEB GUI since we will use CLI commands to finish all the
other settings.
4. Configure the port based VLAN through Telnet or Console port. Connect the
CLI mode of P-870H-51 through Telnet session or console UI. In this case, we
will use Telnet session to show how to configure the CLI command.
All contents copyright 2008 ZyXEL Communications Corporation.
VES-1616/24FA-5x Series Support Notes
87