ZyXEL Communications VES-1616 Support Notes page 55

ZyXEL VES-1616/24FA-5x Series Support Notes
Follow the steps in the previous section to configure VLAN 30 of which ports 1
and 12 are members. Since port 1 is an Access Port, un-select the Tx Tagging
field. After the configuration, the VLAN Status screen should look similar to the
figure as shown.
8. To configure VLAN Stacking, click Advanced Application > VLAN Stacking
in the navigation panel to display the configuration screen.
All contents copyright 2008 ZyXEL Communications Corporation. 54