ZyXEL Communications VES-1616 Support Notes page 58

ZyXEL VES-1616/24FA-5x Series Support Notes
Follow the steps in the previous section to configure VLAN 40 of which ports 1
and 12 are members. Since port 12 is a TunnelPort, select the Tx Tagging field.
For the Access Port (port 1), un-select the Tx Tagging field. After the
configuration, the VLAN Status screen should look similar to the figure as shown.
8. To configure VLAN Stacking, click Advanced Application > VLAN Stacking
in the navigation panel to display the configuration screen.
All contents copyright 2008 ZyXEL Communications Corporation. 57