Maintenance - Terex Genie GS-1930 Operator's Manual

Fifth Edition • Fourth Printing
Observe and Obey:
Only routine maintenance items specified in
this manual shall be performed by the
operator.
Scheduled maintenance inspections shall be
completed by qualified service technicians,
according to the manufacturer's specifications
and the requirements specified in the
responsibilities manual.
Use only Genie approved replacement parts.
Maintenance Symbols Legend
The following symbols have been used in this
manual to help communicate the intent of the
instructions. When one or more of the symbols
appears at the beginning of a maintenance
procedure, it conveys the meaning below.
Indicates that tools will be required to
perform this procedure.
Indicates that new parts will be required
to perform this procedure.
Part No. 114423
Check the Hydraulic Oil Level
Maintaining the hydraulic oil at the proper levels is
essential to machine operation. Improper
hydraulic oil levels can damage hydraulic
components. Daily checks allow the inspector to
identify changes in oil level that might indicate the
presence of hydraulic system problems.
Note: Perform this procedure with the platform in
the stowed position.
1 Visually inspect the oil level in the hydraulic
tank.
Result: The hydraulic oil level should be as
marked on the tank.
2 Add oil if necessary. Do not overfill.
Hydraulic oil specifications
Hydraulic oil type
GS-30 • GS-32 • GS-46
Operator's Manual

Maintenance

Chevron Rykon
Premium MV equivalent
47