Mitsubishi Electric FR-A520-2.2K Instruction Manual page 215

Name
PG follower (Note 4) FR-FP
Master controller (Note 4) FR-FG
Soft starter (Note 4) FR-FC
Deviation detector (Note 4) FR-FD
Preamplifier (Note 4) FR-FA
Pilot generator (Note 4) QVAH-10
Deviation sensor (Note 4) YVGC-500W-NS
Frequency setting
WA2W
potentiometer (Note 4)
Frequency meter (Note 4) YM206RI
Calibration resistor (Note 4) RV24YN
Inverter setup software FR-SW0-SETUP-WE
Note: 1. "H" in the type code indicates 400V class.Power supply specifications of FR series controllers
and setters: 200VAC 50Hz, 200V/220VAC 60Hz, 115VAC 60Hz.
2. Rated power consumption
3. The intercompatibility attachment (FR-A5AT
exception of some models.
4. Options available in Japan only.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Type Application, Specifications, etc.
For follow-up operation using the signal of a pilot
generator (PG). (2VA)
For parallel operation of several (up to 35) inverters.
(5VA)
For soft start and stop. Allows parallel operation and
acceleration/deceleration. (3VA)
For synchronous operation. Used with a deviation sensor
and synchro. (5VA)
Can be used as A/V conversion or operational amplifier.
(3VA)
For follow-up operation. 70/35VAC 500Hz (at 2500rpm)
For synchronous operation (mechanical deviation
detection). Output 90VAC/90°
…
For frequency setting. Wire-wound type. 2W1KΩ B
1kΩ
characteristic.
…
Dedicated frequency meter (up to 120Hz scale). Moving-
1mA
coil DC ammeter.
…
For calibration of the frequency meter. Carbon-film type.
10kΩ
B characteristic.
Supports steps from inverter start-up to maintenance.
(FR-SW0-SETUP-WJ is Japanese version.)
) is required to mount the inverter, with the
……
199
OPTIONS
Applicable
Inverter
Common to
all models