Connecting To Danfoss Link; Tm Cc - Danfoss living connect Installation And User Manual

3. Installation - step by step

3.4 Connecting to Danfoss Link

Each thermostat must be connected to the Danfoss
Link CC. This is best done by standing beside each
TM
thermostat with the Danfoss Link
the recommended 014G0262 battery
pack).
1. The "Configure room"
menu is displayed.
Select "Room devices".
2. Select "Add a device".
3. Press Begin Registration,
and then press and release
on the thermostat.
4. Repeat for each device.
5. Once all devices have been
registered and the Danfoss Link
is placed in its final position, perform
a network test (see separate Danfoss
Link CC manual).
TM
Danfoss Heating Solutions
CC
TM
CC (connected to
TM
CC
TM
UK
TR
SI
HR
9