–
Tighten screw
Guideline
Screw, top steering
stem
E00926-11
–
Tighten screws
Guideline
Screw, top triple
clamp
E00914-12
–
Position the brake caliper, and mount and tighten screws
Guideline
Screw, front
brake caliper
–
Mount the cable tie(s).
–
Position the brake line, wiring harness, and clamp. Mount and
tighten screws
E00375-13
Finishing work
–
Mount the handlebar cushion.
–
Install front fender. (
–
Install the front wheel.
–
Install the headlight mask with the headlight. (
–
Check that the wiring harness, throttle cables, and brake and
clutch lines can move freely and are routed correctly.
–
Check the play of the steering head bearing. (
–
Remove the motorcycle from the lift stand. (
–
Check the headlight setting. (
SERVICE WORK ON THE CHASSIS 12
8
.
M8
20 Nm (14.8 lbf ft)
9
.
M8
20 Nm (14.8 lbf ft)
M8
25 Nm (18.4 lbf ft)
bl
.
p. 78)
(
p. 112)
p. 126)
bk
.
Loctite
®
243™
p. 124)
p. 76)
p. 66)
73