KTM 250 EXC Six Days TPI 2019 Owner's Manual page 147

–
Remove filler plug
–
Add gear oil until it emerges from the drill hole of the gear oil
monitoring screw.
Engine oil (15W/50) (
–
Mount and tighten the gear oil monitoring screw.
Guideline
Screw, gear oil level
check
401955-11
–
Mount and tighten filler plug
–
Attach the foot brake lever spring.
Danger
Danger of poisoning Exhaust gases are toxic and inhal-
ing them may result in unconsciousness and death.
–
Always make sure there is sufficient ventilation
when running the engine.
–
Use an effective exhaust extraction system when
starting or running the engine in an enclosed
space.
–
Start the engine and check that it is oil-tight.
Finishing work
–
Check the gear oil level. (
SERVICE WORK ON THE ENGINE 18
2
.
p. 162)
M6 10 Nm (7.4 lbf ft)
2
.
p. 143)
145