Kill Switch (All Xc-W Models); Horn Button (All Exc Models); Light Switch (All Exc Models); Light Switch (All Xc-W Models) - KTM 250 EXC Six Days TPI 2019 Owner's Manual

6 CONTROLS
6.5
6.6
6.7
6.8
18
Kill switch (All XC‑W models)
E00821-10

Horn button (All EXC models)

E00820-11

Light switch (All EXC models)

E00822-10
Light switch (All XC‑W models)
E00858-10
1
The kill switch is fitted on the left side of the handlebar.
Possible states
in basic position – In this position, the ignition
• Kill switch
circuit is closed and the engine can be started.
pressed – In this position, the ignition circuit
• Kill switch
is interrupted, a running engine stops, and a non-running
engine will not start.
1
The horn button is fitted on the left side of the handlebar.
Possible states
• Horn button in neutral position
Horn button pressed – The horn is operated in this position.
•
1
Light switch is fitted on the left side of the handlebar.
Possible states
Low beam on – Light switch is in the central posi-
tion. In this position, the low beam and tail light are
switched on.
High beam on – Light switch is turned to the left.
In this position, the high beam and the tail light are
switched on.
1
The light switch is located to the left of the combination
instrument.
Possible states
Light off – Light switch is pressed in up to the stop. In this
•
position, the light is switched off.
Light on – Light switch is pulled out to the stop. In this posi-
•
tion, the low beam and tail light are switched on.