Nokia RM-392 Service Manual page 30

Page 2 –10
PK-1
PK-1 is a hardware protection key with a USB interface. It has the same
functionality as the PKD-1 series dongle.
PK-1 is meant for use with a PC that does not have a series interface.
To use this USB dongle for security service functions please register
the dongle in the same way as the PKD-1 series dongle.
PKD-1
SW security device is a piece of hardware enabling the use of the
service software when connected to the parallel (LPT) port of the PC.
Without the device, it is not possible to use the service software.
Printer or any such device can be connected to the PC through the
device if needed.
RJ-230
RJ-230 is a soldering jig used for soldering and as a rework jig for the
engine module.
RJ-51
To be used with ST-30!
RJ-72
To be used with rework stencil ST-28.
COMPANY CONFIDENTIAL
Copyright © 2008 Nokia. All rights reserved.
Service Devices and Service Concepts
Software protection
key
SW security device
Soldering jig
Rework jig
Rework jig
RM-392; RM-393
Issue 1