Cisco VG410 Hardware Installation Manual page 15

Overview
LED
TEMP
FAN
Ethernet SPD. (Speed of the
ethernet port)
Ethernet LNK (Link State of the
ethernet port)
FXS/FXO
(Voice Port Status)
Colour
Green/Yellow/Red
Yellow/Green/Off
Green blinking/Off
Green/Off
Green/Off
Cisco VG410 Voice Gateway Hardware Intallation Guide
LED Information
Description
Off: Monitor is not active.
Red: The system has detected a
critical overcurrent event and may
shut down.
Yellow: One or more temperature
sensors in the system are outside
the acceptable range.
Green: All the temperature sensors
in the system are within acceptable
range.
Off: Fans are not being monitored.
Yellow: One or more fans in the
system are not functioning.
Green: All the fans are operational.
Green blinking: Blink frequency
indicates port speed:
• 1 blink+ pause - FE or GE
port operating at 10 Mb/s
• 2 blinks + pause - FE or GE
port operating at100 Mb/s
• 3 blinks + pause - GE port
operating at1000 Mb/s
Off: No link or a non-Ethernet
802.3af/t capable device is plugged
in.
Green: Ethernet cable is present,
and link is established with other
side
Off: No link is found
Green: There is at least one active
call on the onboard analog
FXS/FXO module.
Off: There is no active call on the
onboard analog FXS/FXO module.
9