Table of Contents
Advertisement
5.10 PCIe x16 DPUs Installation Instructions
5.10.1 Installation Instructions
This section provides detailed instructions on how to install your DPU in a system.
Please note that the following figures are for illustration purposes only.
To power-up the FHHL P-Series DPUs, you need to connect a PCIe external power cable. The PCIe external power cable should be supplied by the
customer. Refer to
External Power Supply Connector
1. Open the system case.
2. Place the DPU in an available PCI Express slot.
NVIDIA BlueField-3 DPU User Guide
for pin descriptions.
| 56
Advertisement
Table of Contents
