Table of Contents
Advertisement
5.4 Safety Precautions
The DPU being installed in a system that operates with voltages that can be lethal. Before opening the case of the system, observe the following precautions to
avoid injury and prevent damage to system components.
•
Remove any metallic objects from your hands and wrists.
•
Make sure to use only insulated tools.
•
Verify that the system is powered off and is unplugged.
•
It is strongly recommended to use an ESD strap or other antistatic devices.
5.5 Unpacking
Check against the package contents list that all the parts have been sent. Check the parts for visible damage that may have occurred during shipping. Please
note that the DPUs must be placed on an antistatic surface.
Please note that if the DPU is removed hastily from the antistatic bag, the plastic ziplock may harm the EMI fingers on the networking connector.
Carefully remove the DPU from the antistatic bag to avoid damaging the EMI fingers.
For package contents, please refer to
5.6 Pre-Installation Checklist
1. Verify that your system meets the hardware and software requirements stated above.
2. Shut down your system if active.
Turn off the power to the system, and disconnect the power cord. Refer to the system documentation for instructions. Before you install the DPU,
make sure that the system is disconnected from power.
NVIDIA BlueField-3 DPU User Guide
Package
Contents.
| 51
Advertisement
Table of Contents
