B3210 Dpus Specifications - Nvidia BlueField-3 User Manual

8.1 B3210 DPUs Specifications

•
OPNs 900-9D3B6-00CC-AA0: Crypto Enabled with integrated BMC
•
900-9D3B6-00SC-AA0: Crypto Disabled with integrated BMC
BlueField-3 SoC BlueField-3 P-Series -
Physical Single-Slot FHHL Card Dimensions: 111.15mm x 167.65mm
Tall Bracket Dimensions: 121.0mm x 21.6mm
Heatsink Dimensions (Length, Width, Height): 139.6mm x 92.7mm x 10.2mm
Interfaces See Supported Interfaces
PCI Express Interface
On-board Memory
Networking Connector
Data Rate InfiniBand
Ethernet (Default Speed)
Protocol Support InfiniBand: IBTA v1.5
1X/2X/4X SDR (2.5Gb/s per lane).
Ethernet: 100GAUI-2 C2M, 100GAUI-1 C2M, 100GBASE-CR4, 100GBASE-CR2, 100GBASE-CR1, 50GAUI-2 C2M, 50GAUI-1 C2M,
50GBASE-CR, 50GBASE-R2 , 40GBASE-CR4, 40GBASE-R2, 25GBASE-R, 10GBASE-R, 10GBASE-CX4, 1000BASE-CX, CAUI-4 C2M, 25GAUI
C2M, XLAUI C2M , XLPPI, SFI
Electrical and Thermal Voltage: 12V
Specifications
Electrical and thermal specifications are provided in "NVIDIA BlueField-3 DPUs Electrical and Thermal Specifications" document. You
can access the document either by logging into NVOnline or by contacting your NVIDIA representative.
Environmental Temperature
Humidity
NVIDIA BlueField-3 DPU User Guide
16 Arm-Cores - 560MHz/2133MHz
Gen 5.0 SERDES @ 32.0GT/s, 16 lanes (4.0, 3.0, 2.0 and 1.1 compatible)
Optional: Additional PCIe x16 Gen 5.0 @ SERDES 32GT/s through the PCIe auxiliary passive card and
Cabline SA-II Plus harnesses
•
Dual-channel with 20 DDR5 + ECC (128bit + 16bit ECC) for a total of 32GB @ 5600MT/s
•
40GB pSLC eMMC memory + 128GB SSD
Dual-port QSFP112 (copper and optical)
HDR100/EDR/FDR/SDR
100/50/25/10 Gb/s
(a)
Auto-Negotiation: HDR100 (2 lane x 50Gb/s per lane), EDR (25Gb/s per lane) port, FDR (14.0625Gb/s per lane),
Operational
Non-operational
Operational
Non-operational
0°C to 55°C
(b)
-40°C to 70°C
10% to 85% relative humidity
10% to 90% relative humidity
| 68