Yamaha NMAX GPD150-A Owner's Manual page 78

Periodic maintenance and adjustment
1
1. Taillight cover
2. Screw
4. Remove the turn signal light bulb
socket (together with the bulb) by
turning it counterclockwise.
7
1
1. Turn signal light bulb socket
5. Remove the burnt-out bulb by
pulling it out.
2 1
1. Turn signal light bulb
6. Insert a new bulb into the socket.
7. Install the socket (together with
the bulb) by turning it clockwise.
8. Install the taillight cover by install-
ing the screws.
9. Install the grab bar by installing the
bolts, and then tightening them to
the specified torque.
10. Close the seat.
7-34
Tightening torque:
Grab bar bolt:
17 Nm (1.7 m·kgf, 12 ft·lbf)