Instrument and control functions
Multi-function display
4
1
1. Multi-function display
The multi-function display is equipped
with the following:
an odometer
two tripmeters (which show the
distance traveled since they were
last set to zero)
a fuel reserve tripmeter (which
shows the distance traveled since
the last segment of the fuel meter
started flashing)
an instantaneous fuel consump-
tion display
an average fuel consumption dis-
play
an oil change tripmeter
a V-belt replacement tripmeter
an oil change indicator
a V-belt replacement indicator
an error code display
Push the "SELECT" button to switch
the display between the odometer
mode "ODO", tripmeter modes "TRIP
1" and "TRIP 2", oil change tripmeter
mode "OIL TRIP", V-belt replacement
tripmeter mode "V-BELT TRIP", in-
stantaneous fuel consumption mode
"F/ECO" (km/L or L/100 km) and aver-
age fuel consumption mode "AVE
F/ECO" (km/L or L/100 km) in the fol-
lowing order:
ODO → TRIP 1 → TRIP 2 → OIL TRIP
→ V-BELT TRIP → F/ECO → AVE
F/ECO → ODO
If the fuel level warning indicator " "
and last segment of the fuel meter start
flashing, the display automatically
changes to the fuel reserve tripmeter
mode "TRIP F" and starts counting the
distance traveled from that point. In
that case, push the "SELECT" button
to switch the display between the vari-
ous tripmeter, odometer, oil change
tripmeter, V-belt replacement tripme-
4-6
ter, instantaneous fuel consumption
and average fuel consumption modes
in the following order:
TRIP F → TRIP 1 → TRIP 2 → OIL TRIP
→ V-BELT TRIP → F/ECO → AVE
F/ECO → ODO → TRIP F
To reset a tripmeter, select it by push-
ing the "SELECT" button, and then
push the "RESET" button for at least
one second.
TIP
If you do not reset the fuel reserve
tripmeter manually, it will reset au-
tomatically and disappear from
the display after refueling and
traveling 5 km (3 mi).
If you do not reset tripmeters 1
and 2, they will reset to 0 and con-
tinue counting after 9999.9 has
been reached.
The odometer will lock at 999999
and cannot be reset.