Yamaha NMAX GPD150-A Owner's Manual page 76

Periodic maintenance and adjustment
1
1. Taillight unit
2. Side cover
6. Remove the taillight bulb socket
(together with the bulb) by turning
it counterclockwise.
7
1
1. Taillight bulb socket
7. Remove the burnt-out bulb by
pulling it out.
2
1
1. Taillight bulb
8. Insert a new bulb into the socket.
9. Install the socket (together with
the bulb) by turning it clockwise.
10. Place the taillight unit in the origi-
nal position, and then install the
screws and quick fasteners.
11. Install the taillight cover by install-
ing the screws.
12. Install the grab bar by installing the
13. Close the seat.
7-32
bolts, and then tightening them to
the specified torque.
Tightening torque:
Grab bar bolt:
17 Nm (1.7 m·kgf, 12 ft·lbf)