Yamaha NMAX GPD150-A Owner's Manual page 21

High beam indicator light "
This indicator light comes on when the
high beam of the headlight is switched
on.
Coolant temperature warning
light " "
This warning light comes on if the en-
gine overheats. If this occurs, stop the
engine immediately and allow the en-
gine to cool.
The electrical circuit of the warning
light can be checked by turning the key
to "ON". The warning light should
come on for a few seconds, and then
go off.
If the warning light does not come on
initially when the key is turned to "ON",
or if the warning light remains on, have
a Yamaha dealer check the electrical
circuit.
NOTICE
Do not continue to operate the en-
gine if it is overheating.
EAU11081
" TIP
If the engine overheats, see page 7-37
for further instructions.
Engine trouble warning light "
EAU67440
This warning light comes on if a prob-
lem is detected in the electrical circuit
monitoring the engine. If this occurs,
have a Yamaha dealer check the self-
diagnosis system. (See page 4-8 for an
explanation of the self-diagnosis de-
vice.)
The electrical circuit of the warning
light can be checked by turning the key
to "ON". The warning light should
come on for a few seconds, and then
go off.
If the warning light does not come on
initially when the key is turned to "ON",
or if the warning light remains on, have
a Yamaha dealer check the electrical
ECA10022
circuit.
Instrument and control functions
ABS warning light "
In normal operation, the ABS warning
light comes on when the key is turned
to "ON", and goes off after traveling at
a speed of 10 km/h (6 mi/h) or higher.
EAU42775
"
If the ABS warning light:
 does not come on when the key is
 comes on or flashes while riding
 does not go off after traveling at a
The ABS may not work correctly. If any
of the above occurs, have a Yamaha
dealer check the system as soon as
possible. (See page 4-10 for an expla-
nation of the ABS.)
If the ABS warning light does not go
off after traveling at a speed of 10
km/h (6 mi/h) or higher, or if the
warning light comes on or flashes
while riding, the brake system re-
verts to conventional braking. If ei-
ther of the above occurs, or if the
warning light does not come on at
all, use extra caution to avoid possi-
4-3
"
ABS
turned to "ON"
speed of 10 km/h (6 mi/h) or high-
er
WARNING
EAUU1810
4
EWA16041