Table of Contents
Advertisement
7.
Press OK to select Register.
8.
Select a type of F code box:
>
Bulletin Box - refer to
>
Confidential Box - refer to
Registering an F code Bulletin box
1.
Press OK to select Bulletin Box.
2.
Press the Right arrow key to select Box Name.
(a)
Using the arrow keys and on screen keyboard, enter a box name.
(b)
Highlight Done and press OK.
NOTE
If using one-byte characters, up to 16 characters can be registered.
3.
Using the Down arrow, scroll to Sub-Address and press the Right arrow key.
(a)
Using the keypad enter the sub address.
(b)
Highlight Done and press OK.
NOTE
A sub address can be registered using up to 20 digits. Numbers, # and * can
be registered.
If you make a mistake when entering the digits, press the Clear button to
delete and then enter the correct digit.
4.
Using the Down arrow key, scroll to I.D.Code and press the Right arrow key:
(a)
Register an ID Code number (4 digits) using the numeric keypad.
NOTE
The ID code is not displayed, write it down and keep it safe!
(b)
Press OK.
5.
Press OK to complete.
Registering an F code confidential box
1.
Press OK to select Confidential Box.
2.
Press the Right arrow key to select Box Name.
(a)
Using the arrow keys and on screen keyboard, enter a box name.
(b)
Highlight Done and press OK.
NOTE
If using one-byte characters, up to 16 characters can be registered. If using
double-byte characters, up to 8 characters can be registered.
Faxing - MC342dn, MC342dw, MC362dn, MC362dw, MC562dn, MC562dw, ES5462 MFP and MPS2731mc only > 99
"Registering an F code Bulletin box" on page 99
"Registering an F code confidential box" on page
99.
Advertisement
Table of Contents
