Table of Contents
Advertisement
15.
Select Quit Photoshop from Photoshop.
NOTE
OS X 10.8 cannot use TWAIN scanner drivers.
For Mac OS X (MPS2731mc)
If using Image Capture scanner drivers:
1.
Press the SCAN key on the operator panel.
2.
Place your document with text face up in the ADF or face down on the document
glass.
3.
Press the
to select Remote PC and then press OK.
4.
Check that the TWAIN is selected, and press OK.
5.
Check that Select a Connecting PC is selected and then press OK.
6.
Check that From Network is selected and then press OK.
7.
Press the
to select the destination you want and then press OK.
8.
Press
or
M
M
ONO
ONO
9.
If your device's PC Scan Mode is set to Secure Scan Mode, you must use the
Network Scanner Setup Tool to make the following settings:
>The address of your Mac must be registered with your device.
>The port number used for scanning must be registered. This port number can be
changed in your device's "Network Scan Destination" settings.
The Network Scanner Setup Tool is installed in the following location:
/Applications/OKIDATA/Scanner/
Start the Network Scanner Setup Tool, select your MFP device and change the
settings.
10.
Start Image Capture on your computer.
11.
Select the device.
12.
Click a scan button.
Scanning starts.
13.
Select Quit Image Capture from Image Capture.
If using TWAIN scanner drivers:
1.
Press the SCAN key on the operator panel.
2.
Place your document with text face up in the ADF or face down on the document
glass.
3.
Press the
to select Remote PC and then press OK.
4.
Check that the TWAIN is selected, and press OK.
5.
Check that Select a Connecting PC is selected and then press OK.
6.
Check that From Network is selected and then press OK.
7.
Press the
to select the destination you want and then press OK.
8.
Press
or
M
M
ONO
ONO
.
C
C
OLOR
OLOR
.
C
C
OLOR
OLOR
Scanning > 78
Advertisement
Table of Contents
