Asko T208C.W.AU Instructions For Use Manual page 23

STEP 6:
CLOSE THE DOOR AND START THE DRYING PROCESS.
Close the dryer door and press the Start/Pause/Stop button.
Start (pressed briefl y – start/resume)
Pause (pressed briefl y – drying temporarily suspended)
Stop (press and hold for 3 seconds – stop or cancel)
Remaining time
Depending on the selected program and load, anticipated drying time will be displayed in hours and minutes.
Actual drying time will depend on the selected program, load, type of laundry, spinning rate etc.
Actual drying time may be longer or shorter than initially displayed.
Pausing, stopping or changing the program
Press start to resume Drying cycle
Preparing for program canceling. Cooling down.
Program canceled. Garments can still be hot.
Only after the cooling is complete, can you use the program selector knob to select a new program and press
the Start/Pause/Stop button.
The fi nal part of a tumble dryer cycle occurs without heat (cool down cycle) to ensure that the items are
left at a temperature that ensures that the items will not be damaged.
A drying program can be paused using the ON/OFF button.
The dryer will switch off . After the dryer is switched on, press the Start button to resume the program.
Starting
Drying
Paused
Door is open
2:20
2:19
To stop the program, briefl y press the
Start/Pause/Stop button.
To resume a program, press the Start/
Pause/Stop button again.
The drying program may also be paused
by opening the dryer door.
To resume the programme, simply close
the door and press the Start/Pause/
Stop button.
To change or stop the drying program,
press the Start/Pause/Stop button and
hold it for 3 seconds.
The selected program will be stopped
and the cooling stage will begin. Cooling
time depends on the selected program.
23