Asko T208C.W.AU Instructions For Use Manual page 15

CONNECTING TO THE POWER MAINS
After installation, the dryer should stand still for two
hours before it is connected to the power mains.
Connect the appliance to an earthed power outlet. After
installation, the wall outlet should be freely accessible.
The outlet should be fi tted with an earth contact (in
compliance with the relevant regulations).
Connection upon delivery
TYPE: TDXX.XXXXX
Art.No.: XXXXXX/XX
XXX V ~ XXXX W
IPX4 XX Hz
Information about your dryer is indicated on the rating
(type) plate.
Use the type A diff erential current protection switch.
The dryer may not be connected to the power mains
using an extension cord.
Do not connect the tumble dryer to an electrical
outlet intended for an electric shaver or hair dryer.
Any repair and maintenance pertaining to safety or
performance should be done by trained experts.
MODEL: XXXXXX.X
Ser.No.: XXXXXXXX
X kg
XXA
15