Asko T208C.W.AU Instructions For Use Manual page 13

Undo the door hinge assembly (left) and the door
6
latch assembly (right), switch their positions, and
replace the screws (door hinge assembly to the right-
hand side, door latch assembly to the left-hand side).
Use the screwdriver to remove the plastic part
more easily.
Undo the door ring and remove it temporarily.
7
Rotate the door glass cover by 90°so that the sign
8
indicating the opening of the door is on the other
side.
Rotate the door ring by 180°, install it onto the
9
door, and fasten it with screws.
Replace the door on the door hinge and fasten
10
the screws.
13