Dsc/Radio Setup Mode - Standard Horizon Quest-X GX1500S Owner's Manual

13.3 DSC/RADIO SETUP MODE

The RAM+ can access the DSC / RADIO setup menu (refer to section "11
DIGITAL SELECTIVE CALLING" and section "12 RADIO SETUP MODE" for
details). The LAMP
RAM+ only controls the RAM+'s display and speaker.
DSC/RADIO Setup mode from the RAM+:
1. Press and hold down the [ CALL/SET ] key until "
pears.
2. Press the [ ] / [ ] key to select "
3. Press the [ CALL/SET ] key, then select the menu item you wish to work on
by pressing the [ ] / [ ] key.
4. Press the [ CALL/SET ] key.
5. Press the [ ] / [ ] key to change the value or condition for the menu item,
then press the [CALL/SET] key to save the new setting.
6. Press the [ ] / [ ] key to select "
return to the normal operation.
RADIO SETUP-menu
When setup menu is selected, the GX1500S will be temporarily disabled
until the RAM+ mic, exits from the setup mode.
Page 68
, CONTRAST , and KEY BEEP menu item accessed from the
RADIO SETUP " or "
," then press the [ CALL/SET ] key to
EXIT
DSC SETUP-menu
NOTE
RADIO SETUP
" menu ap-
DSC SETUP " menu.
GX1500S