Chapter 6: Removing And Installing Field Replaceable Units (Frus); Intrusion Switch; Removing The Intrusion Switch - Dell OptiPlex Tower 7010 Owner's Manual

Removing and installing Field Replaceable
The replaceable components in this chapter are Field Replaceable Units (FRUs).
CAUTION: The information in this section is intended for authorized service technicians only.
CAUTION: To avoid any potential damage to the component or loss of data, ensure that an authorized service
technician replaces the Field Replaceable Units (FRUs).
CAUTION: Dell Technologies recommends that this set of repairs, if needed, to be conducted by trained
technical repair specialists.
CAUTION: As a reminder, your warranty does not cover damages that may occur during the courses of FRU
repairs that are not authorized by Dell Technologies.
NOTE: The images in this document may differ from your computer depending on the configuration you ordered.

Intrusion switch

Removing the intrusion switch

Prerequisites
1. Follow the procedure in before working inside your
2. Remove the side cover.
About this task
The following image indicates the location of the intrusion switch and provides a visual representation of the removal procedure.
64 Removing and installing Field Replaceable Units (FRUs)
computer.
Units (FRUs)
6