Dell OptiPlex Tower 7010 Owner's Manual page 109

Table 29. System setup options—Storage menu (continued)
Storage
Type
Device
M.2 PCIe SSD-0
Type
Device
Enable MediaCard
Secure Digital (SD) Card
Secure Digital (SD) Card Read-Only Mode Enable or disable the SD card read-only mode.
Table 30. System setup options—Display menu
Display
Multi-Display
Enable Multi-Display
Primary Display
Video Primary Display
Full Screen Logo
Table 31. System setup options—Connection menu
Connection
Network Controller Configuration
Integrated NIC
Wireless Device Enable
WLAN
Bluetooth
Enable UEFI Network Stack
HTTPs Boot Feature
HTTPs Boot
Displays the SATA HDD type information of the computer.
Displays the SATA HDD device information of the computer.
Displays the M.2 PCIe SSD-0 type information of the computer.
Displays the M.2 PCIe SSD-0 device information of the computer.
Enable or disable the SD card.
By default, the Secure Digital (SD) Card option is enabled.
By default, the Secure Digital (SD) Card Read-Only Mode option is not
enabled.
Enable or disable the Enable Multi-Display buttons on the computer.
By default, the option is enabled.
Determines the primary display when multiple controllers are available on the
computer
By default, the Auto option is enabled.
Enable or disable full screen logo.
By default, the option is not enabled.
Controls the on-board LAN controller.
By default, the Enabled with PXE option is enabled.
Enable or disable the internal WLAN device
By default, the option enabled.
Enable or disable the internal Bluetooth device
By default, the option enabled.
Enable or disable UEFI Network Stack and controls the on-board LAN
Controller.
By default, the option is enabled.
Enable or disable the HTTPs Boot feature.
By default, the HTTPs Boot option is enabled.
BIOS setup 109