Table of Contents
Advertisement
INSTALLATION
Cabinet construction for built in oven
For the best integration within a kitchen, install this
appliance in a cupboard that gives a flush fit with the
surrounding cupboard fronts. A recess of 20mm is ideal.
NOTE: Your appliance must be mounted on a horizontal
surface for the full width and depth of the product.
NOTE: A ventilation slot 20mm wide is required at the
rear of the base of the cabinet floor.
cupboard
door
876mm
Mounting holes
NOTE: If a powerpoint is fitted it must be accessible with
the appliance installed.
8
INSTALLATION OF THE APPLIANCE
(continued)
900mm
20mm
20mm
(see NOTE)
100mm
max.
Infill panel max.
16mm thickness
900mm
20mm
slot
580mm
*Refer to cooktop installation instructions for
required clearance between cooktop and oven.
*20mm
see note
below
Advertisement
Table of Contents
