Table of Contents
Advertisement
Fault
E:9210 lights up.
E:9240 lights up.
All LEDs lit up or
flashing.
Cause and troubleshooting
Spray arm rotation of the lower spray arm is blocked.
Arrange the tableware so it does not obstruct spray
▶
arm rotation of the lower spray arm.
Lower spray arm is not correctly fitted.
Fit the lower spray arm correctly.
▶
→ "Cleaning the spray arms", Page 44
Filters are soiled or blocked.
Clean the filters.
▶
→ "Cleaning filters", Page 43
Electronics have detected a fault.
Press the main switch button for approx.
1.
4 seconds.
The appliance is reset and restarted.
If the problem occurs again:
2.
Switch off the appliance.
‒
Pull out the mains plug or switch off the fuse in
‒
the fuse box.
Wait at least 2 minutes.
‒
Switch on the fuse in the fuse box or insert the
‒
mains plug.
Switch the appliance on.
‒
If the problem occurs again:
3.
Contact customer service.
‒
→ "Customer Service", Page 55
Troubleshooting en
49
Advertisement
Table of Contents
