Page 1
Dishwasher SN67ZX86DM Information for Use Register your product on My Siemens and discover exclusive services and offers. siemens-home.bsh-group.com/welcome The future moving in. Siemens Home Appliances...
en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡...
Page 5
Safety en WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Always use the supplied power cable for the new appliance. ▶ Connect the appliance to a power supply with alternating cur- rent only via a properly installed socket with earthing.
en Safety Contact between the appliance and installation lines may lead to a defect in these lines, e.g. gas pipes and power lines. Gas from a corroded gas pipe can ignite. A damaged power line can cause a short circuit. ▶ Check that there is a distance of at least 5 cm between the ap- pliance and installation lines.
Page 7
Safety en Highly caustic alkaline or highly acidic cleaning agents in conjunc- tion with aluminium parts in the interior of the appliance may cause explosions. ▶ Never use highly caustic alkaline or highly acidic cleaning agents, in particular commercial or industrial products, in con- junction with aluminium parts (e.g.
en Safety WARNING ‒ Risk of burns! The blow opening of the Zeolith container becomes hot and can cause burns. ▶ Never touch the blow opening of the Zeolith container. 1.6 Damaged appliance WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous. ▶...
Page 9
Safety en ▶ Never let children play with or operate the appliance. WARNING ‒ Risk of harm to health! Children can lock themselves in the appliance, thereby putting their lives at risk. ▶ With redundant appliances, unplug the power cord. Then cut through the cord and damage the lock on the appliance door beyond repair so that the appliance door will no longer close.
en Preventing Modified or damaged water hoses Preventing 2 Preventing material may result in material damage and damage to the appliance. damage Never kink, crush, modify or cut ▶ through water hoses. Preventing 2.1 Safe installation Only use the water hoses supplied ▶ with the appliance or genuine ATTENTION! spare hoses.
Environmental protection and saving energy en So as not to scratch the finish on 3.3 Zeolith drying ▶ the appliance, do not use sponges The appliance features a Zeolith con- with a rough surface or abrasive tainer. Zeolith drying lets you save cleaning agents.
en Installation and connection Sensor set- Description 4 Installation and con- ting nection Standard Optimum setting for a mixed load and To ensure proper operation, connect heavily soiled table- the appliance to the power and water ware. Saves both en- supply correctly. Observe the spe- ergy and water.
Installation and connection en installing it under a continuous work- 4.4 Drinking water connec- top that is securely connected to ad- tion jacent cabinets. Follow the safety instructions. Connect your appliance to a drinking → Page 4 water connection. Follow the instructions for electrical Installing the drinking water connection.
en Familiarising yourself with your appliance 5 Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. Rating plate Rating plate with E number and FD num- ber → Page 55. The data you need for Customer Service → Page 55.
Page 15
Familiarising yourself with your appliance en Detergent dispenser Add detergent to the detergent dispenser. → "Detergent", Page 31 Bottom basket Bottom basket → Page 24 Dispenser for special salt Add special salt to the dispenser for spe- cial salt. → "Water softening system", Page 27 Lower spray arm The lower spray arm washes the table- ware in the bottom basket.
en Familiarising yourself with your appliance 5.2 Controls You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. With some buttons you can perform different functions. 4 5 6 7 8 9 ON/OFF button and reset Switching on the appliance...
Familiarising yourself with your appliance en Display Remote Start If you have activated the function and are controlling the appliance via the Home Connect app, the display lights up on the appliance. WLAN display Home Connect → Page 39 Timer programming Setting timer programming → Page 35 Remote Start → "Remote Start ", Page 40...
Page 18
en Programmes 6 Programmes You can find an overview of the pro- ted. The running time will change if grammes that can be selected here. the rinse aid system is switched off Different programmes, which can be or rinse aid needs to be added. found on the control panel of your The consumption values can be appliance, are available depending...
en Programmes Press the right programme button. Press the button for the relevant additional function. Press for 3 seconds. a The selected programme and the additional function will flash. flashes. a The programme and the additional function are saved. Tip: To reset the programme to the pre-rinse programme stored at the factory, use the Home Connect app or reset your appliance to the factory...
Page 21
Additional functions en 7 Additional functions You can find an overview of the additional functions that can be selected here. Different additional functions, which can be found on the control panel of your appliance, are available depending on the appliance configuration. You can se- lect certain additional functions depending on the programme.
en Features Symbol Additional func- tion Custom You can use this function to selectively activ- ate 4 zones in the lower basket with the lower spray arm. This ensures efficient, thorough cleaning of tableware with different soiling levels. ¡ Use the Home Connect app to specify the zone in the lower basket that contains heav- ily soiled and hard-to-clean tableware.
Features en Raise or lower the basket evenly to 8.1 Top basket the right level. Arrange cups, glasses and small items of tableware in the top basket. Check that the basket is level on both sides. Release the levers. Knife shelf a The basket clicks into position. You can adjust the height of the top Slide the basket back in.
en Features 8.3 Etagere Use the cutlery shelf and space un- derneath for small cups and glasses or for large items of cutlery, e.g. cooking spoons or serving cutlery. 8.5 Folding prongs Use the folding prongs to position tableware securely, e.g. plates. If you do not need the cutlery shelf, you can fold it up.
Features en Push the lever forwards and fold Fold down the holder and insert ▶ down the prongs . the bottle . To use the prongs again, fold them 8.8 3rd basket back up. a The prongs audibly click into posi- Use the 3rd basket to wash large tion.
en Features Set the slider to ON or OFF. 8.9 glassZone Push in the top basket. Use the glassZone in the top basket Cleaning glassZone to clean all types of glasses gently Limescale and soiling from the dish- yet thoroughly. washing water can block the nozzles. Note: Always operate the appliance with the glassZone fitted.
first time en Place the glassZone in the top Press repeatedly until the display basket and lock in position . shows the required setting. Note: If you select Initial start-up Home Connect here, make further settings using the Home Connect app on your mobile device. You can change the settings for initial start-up and other Basic set- tings → Page 37 on the appliance...
en Water softening system 10.1 Overview of water hardness settings You can find an overview of the water hardness values that can be selected here. You can find out how hard your water is from your local water company or by using a water hardness tester. Water hardness Hardness range mmol/l...
Rinse aid system en Special salt for dishwashers can 10.4 Switching off the water damage the tub due to corrosion. softening system To make sure that any special salt ▶ that escapes is washed out of the If you find the special salt refill indic- tub, add the special salt to the dis- ator irritating, e.g.
en Rinse aid system Adding rinse aid 11.2 Setting the amount of If the display shows "Please add rinse aid rinse aid. ", add rinse aid. Only use If there are streaks or water marks on rinse aid for domestic dishwashers. tableware, change the amount of Press the catch on the lid of the rinse aid.
Detergent en To save the settings, press Liquid detergent approx. 3 seconds. Liquid detergent works faster and is a The rinse aid system is switched recommended for shorter pro- off and the rinse aid refill indicator grammes without PreRinse. is deactivated. Sometimes liquid detergent may leak out despite the detergent dispenser being closed.
en Detergent ing and drying results we recom- ¡ To prevent sticking, only touch de- mend using special salt and rinse aid tergents in a water-soluble pouch from a water hardness of 17 °E. If with dry hands and only ever place you are using combined detergent, them in a dry detergent dispenser.
Tableware en Close the lid of the detergent dis- 13.1 Damage to glass and penser. tableware Only put glasses and china in the dishwasher if it is marked as dish- washer-safe by the manufacturer. Avoid damage to glass and table- ware. Cause Recommenda- tion The following...
en Tableware ¡ For better washing and drying res- Cause Recommenda- ults, position items with curves or tion recesses at an angle so water can Highly caustic al- If you are using run off. kaline or highly highly caustic al- acidic cleaning kaline or highly solutions, in par- acidic cleaning...
operation en If you do not perform any actions on the appliance for 10 minutes, the appliance will automatically switch off. 14.2 Setting a programme To adjust the washing programme to the soiling level of the tableware, se- lect a suitable programme. Press the right programme button.
en operation Note: To deactivate timer program- 14.7 Terminate programme ming, press for approx. To end a programme early or to 4 seconds. switch from a programme that has already started, you will need to can- 14.5 Starting the programme cel it first. Press ▶ Open the appliance door.
Basic settings en 15 Basic settings You can configure the basic settings for your appliance to meet your needs. 15.1 Overview of basic settings The basic settings depend on the features of your appliance. Basic setting Selection Description Time setting 00:00 - 24:00 Set the current time.
Page 38
en Basic settings Basic setting Selection Description Water connection Cold water Set cold water or hot water connec- Hot water tion. Only set the appliance to hot water if this can be prepared with little energy and a suitable installation is available, e.g.
Home Connect en Basic setting Selection Description Remote Start Activate or deactivate Manual → "Remote Start ", Page 40. Permanent This basic setting is not available until after you have connected the device with the Home Connect app. → "Home Connect ", Page 39 Greeting Switch display of the brand name logo on or off when the appliance is switched on.
en Home Connect The Home Connect app guides you Setting up Home Connect through the entire login process. Fol- Requirements low the instructions in the Home Con- ¡ The Home Connect app has been nect app to configure the settings. installed on your mobile device. Tips ¡ The appliance is receiving signals ¡...
Cleaning and servicing en Note: Please note that the Requirements ¡ The appliance is connected to your Home Connect functions can only be WLAN home network. utilised with the Home Connect app. ¡ The appliance is connected to the Information on data protection can be Home Connect app.
Dishwasher Care and Ma- ance to malfunction. To avoid such chine Cleaner for Dishwashers online faults and reduce odours, we recom- at https://www.siemens-home.bsh- mend cleaning your appliance at reg- group.com/store or from customer ular intervals. service.
Cleaning and servicing en ¡ Make sure that there are no alu- 17.5 Filter system minium parts, e.g. extractor hood The filter system removes coarse grease filters or aluminium pans, in soiling from the dishwashing cycle. the interior of the appliance. ¡ If you have not run Machine Care after 3 washing cycles, the indic- ator for Machine Care will go out automatically.
en Cleaning and servicing Pull down the micro filter to re- Insert the filter system into the ap- move. pliance and turn the coarse filter clockwise. Press the locking catches Make sure that the arrow markings gether and lift the coarse filter out match up.
Page 45
Cleaning and servicing en Position the lower spray arm as Insert the lower spray arm as shown , grip in the middle and shown and push down. pull up to remove . a The spray arm clicks into position. Check the outlet nozzles on the Insert the upper spray arm and spray arms for blockages under screw it firmly in place.
This will avoid unneces- sary costs. Tip: You can find further information and explanations on troubleshooting on- line by scanning the QR code in the table of contents and on our website siemens-home.bsh-group.com . WARNING Risk of electric shock! Incorrect repairs are dangerous.
Page 47
Troubleshooting en Fault Cause and troubleshooting E:3200 or indicator Remove the filter from the supply hose for water supply lights Clean the filter. Re-insert the filter in the supply hose. Screw the water connection back on. Check the water connection for leaks. Restore the power supply.
Page 48
en Troubleshooting Fault Cause and troubleshooting E:6103 lights up. Wa- Not an appliance fault. Siphon connection is still ter is not drained. closed or the wastewater hose is kinked or blocked. Check the connection to the siphon and open if ne- cessary.
Page 49
Troubleshooting en Fault Cause and troubleshooting E:9210 lights up. Spray arm rotation of the lower spray arm is blocked. Arrange the tableware so it does not obstruct spray ▶ arm rotation of the lower spray arm. Lower spray arm is not correctly fitted. Fit the lower spray arm correctly.
Page 50
en Troubleshooting Fault Cause and troubleshooting Remnants of food on Tableware is placed too close together or basket is tableware. overfilled. Arrange tableware with sufficient space in between. The spray jets must reach the surfaces of the table- ware. Avoid points of contact. Spray arm rotation of the lower spray arm is blocked.
Page 51
Troubleshooting en Fault Cause and troubleshooting Remnants of food on Adjust the sensitivity of the sensors. ▶ tableware. → "Sensors", Page 11 Tall narrow receptacles in corner areas are not rinsed adequately. Do not position tall narrow receptacles at too great ▶ an angle or in corner areas. Top baskets on right and left are not set to same height.
Page 52
en Troubleshooting Fault Cause and troubleshooting Rust spots on cutlery. Remove any spilled special salt from the tub. Screw the cap of the special salt dispenser on tight. Detergent residue is Spray arms were blocked by tableware so detergent present in the deter- was not rinsed out.
Transportation, storage and disposal en Insert the pump cover and press 18.1 Clean wastewater pump down . Large remnants of food or foreign bodies can block the waste water pump. As soon as the rinsing water no longer drains properly, the waste water pump must be cleaned.
en Transportation, storage and disposal 19.2 Protect appliance from 19.4 Disposing of old appli- frost ance If there is a risk of frost where the ap- Valuable raw materials can be re- pliance will be standing, e.g. in a holi- used by recycling. day home, empty the appliance com- pletely.
Customer Service en ¡ The liability guarantee is valid for 20 Customer Service the service life of the appliance. ¡ A claim can only be made under Detailed information on the warranty the guarantee if the appliance has period and terms of warranty in your been correctly installed and con- country is available from our after- nected with Aqua-Stop according...
A detailed RED Declaration of Con- Munich, Germany. formity can be found online at The source code will be made avail- siemens-home.bsh-group.com able to you on request. among the additional documents on the product page for your appliance. Depending on the appliance specifications...
Declaration of Conformity en 2.4 GHz band (2400–2483.5 MHz): Max. 100 mW 5 GHz band (5150–5350 MHz + 5470–5725 MHz): Max. 100 mW UK (NI) 5 GHz WLAN (Wi-Fi): For indoor use only. 5 GHz WLAN (Wi-Fi): For indoor use only.
Page 60
BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München, GERMANY siemens-home.bsh-group.com Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG *9001722689* 9001722689 (030126) 650 P5...