Table of Contents
Advertisement
en Cleaning and servicing
Pull down the micro filter to re-
4.
move.
Press the locking catches
5.
gether and lift the coarse filter out
.
1
Clean the filter elements under run-
6.
ning water.
Carefully clean the rim of dirt
between the coarse and fine filter.
Re-assemble the filter system.
7.
Make sure that the locking catches
on the coarse filter snap into posi-
tion.
44
Insert the filter system into the ap-
8.
pliance and turn the coarse filter
clockwise.
to-
Make sure that the arrow markings
match up.
The spray arm will automatically re-
9.
turn to the correct position when
2
starting, so it is not necessary to
reposition the spray arm to the
front.
17.6 Cleaning the spray arms
Limescale and soiling in the dish-
washing water may block the nozzles
and bearings on the spray arms.
Clean the spray arms regularly.
Unscrew the upper spray arm
1.
and pull down to remove
.
1
2
Advertisement
Table of Contents
