Table of Contents
Advertisement
Fault
E:3200 or indicator
for water supply lights
up.
E:3400 lights up.
E:6102 lights up.
Cause and troubleshooting
Remove the filter from the supply hose
5.
Clean the filter.
6.
Re-insert the filter in the supply hose.
7.
Screw the water connection back on.
8.
Check the water connection for leaks.
9.
Restore the power supply.
10.
Switch the appliance on.
11.
Water is continuously running into the appliance.
Turn off the water tap.
1.
Call Customer Service → Page 55.
2.
Not an appliance fault. Wastewater pump is blocked
or the cover of the wastewater pump is loose.
Clean the wastewater pump.
1.
→ "Clean wastewater pump", Page 53
Secure the cover of the wastewater pump so it
2.
clicks into position.
→ "Clean wastewater pump", Page 53
Note: This is not an appliance fault. The appliance has
detected a problem during drainage. It is very likely
that the user or installer can solve this problem.
Please note that faults caused by the user or installa-
tion are not covered by the guarantee and will be
billed.
Troubleshooting en
47
Advertisement
Table of Contents
