Removing The M.2 2230 Solid-State Drive; Installing The M.2 2230 Solid-State Drive - Dell Precision 5570 W3D04 Service Manual

Removing the M.2 2230 solid-state drive

About this task
If you are replacing the M.2 2230 solid-state drive with an M.2 2280 solid-state drive, the following images indicate how to
remove the M.2 2230 solid-state drive from the M.2 2230 solid-state drive bracket.
1. After removing the M.2 2230 solid-state drive with bracket from the solid-state drive slot., keep the printed side of the M.2
2230 solid-state drive facing up.
2. Remove the M2x2 screw that secures the M.2 2230 solid-state drive to the M.2 solid-state drive bracket.
3. Lift the M.2 2230 solid-state drive off the M.2 solid-state drive bracket.

Installing the M.2 2230 solid-state drive

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
This computer supports two solid-state drive form factors.
● M.2 2230
● M.2 2280
If you are replacing the M.2 2280 solid-state drive with an M.2 2230 solid-state drive, the following images indicate how to
install the solid-state drive bracket to the M.2 2230 solid-state drive card before installing the 2230 solid-state drive to the
computer.
1. With the printed side of the solid-state drive facing up, align the screw hole on the M.2 2230 solid-state drive with the screw
hole on the M.2 solid-state drive bracket.
26 Removing and installing components