Torque Specifications - Kohler Command CH20 Service Manual

TORQUE SPECIFICATIONS

Crankcase
Breather Cover Fastener
Oil Drain Plug
Cylinder Head
Fastener (torque in 2 increments)
Nut
Bolt (torque in 2 increments)
Rocker Arm Screw
Black Screw (M6x1.0x34)
Silver Screw (M6x1.0x45)
Flywheel
Fan Fastener
Flywheel Retaining Screw
Governor
Lever Nut
Ignition
Spark Plug
Module Fastener
Rectifi er-Regulator Fastener
Muffl er
Retaining Nut
Oil Cooler
Adapter Nipple
Oil Sentry
™
Pressure Switch
Regulator
Bracket Screws
Screws
Solenoid (Starter)
Mounting Hardware
Nippondenso Starter
Delco-Remy Starter
Nut, Positive (+) Brush Lead
Nippondenso Starter
Delco-Remy Starter
Speed Control Bracket
Fastener
4 Values are in Metric units. Values in parentheses are English equivalents.
Lubricate threads with engine oil prior to assembly.
6
24 690 30 Rev. G
4,6
KohlerEngines.com
CH18/CH20/
CH640 CH23
11.3 N·m (100 in. lb.) into new holes
7.3 N·m (65 in. lb.) into used holes
13.6 N·m (10 ft. lb.)
fi rst to 16.9 N·m (150 in. lb.)
fi nally to 35.5 N·m (315 in. lb.)
fi rst to 22.6 N·m (200 in. lb.)
fi nally to 41.8 N·m (370 in. lb.)
18.1 N·m (160 in. lb.)
13.6 N·m (120 in. lb.)
9.9 N·m (88 in. lb.)
66.4 N·m (49 ft. lb.)
6.8 N·m (60 in. lb.)
27 N·m (20 ft. lb.)
4.0-6.2 N·m (35-55 in. lb.)
1.4 N·m (12.6 in. lb.)
24.4 N·m (216 in. lb.)
27 N·m (20 ft. lb.)
4.5 N·m (40 in. lb.)
22.6 N·m (200 in. lb.)
24.4 N·m (216 in. lb.)
6.0-9.0 N·m (53-79 in. lb.)
4.0-6.0 N·m (35-53 in. lb.)
8.0-12.0 N·m (71-106 in. lb.)
8.0-11.0 N·m (71-97 in. lb.)
10.7 N·m (95 in. lb.) into new holes
7.3 N·m (65 in. lb.) into used holes
Specifi cations
CH25/
CH730/CH740
7