Cd-Rom Drive - IBM Aptiva 2190 Hardware Maintenance Service

Table of Contents

Advertisement

CD-ROM Drive

Figure 5-8
CD-ROM Front Panel
NOTE: Position of CD-ROM switches and LEDs may vary from illustration.
Table 5-7
CD-ROM Front Panel Introduction
Item
Description
1
Load / eject button
2
Headphone jack
3
Power-on / busy indicator, lights up in green color while
disc is set in ready state; lights up and flashes in amber
color during data read or seek operation.
4
Headphone volume control
5
Emergency eject hole.
See CD-ROM Emergency-exit below.
CD-ROM Emergency-exit
If for any reason the tray does not eject
15mm Typical
automatically, insert and press an eject-bar inside
the emergency eject hole to manually eject the
tray. A straightened paper clip with a diameter of
1.2 mm (typical) can be used as an eject-bar.
NOTE: Make sure to turn off the power before manual disc eject operation.
5-12

Advertisement

Table of Contents
loading

Table of Contents