Miele TXI 680 WP Operating Instructions Manual page 93

Remote control
The
Remote control
ble if the Miele@home
and activated.
Once the Miele@mobile app has been
installed on your mobile device, you
can check the status of your tumble
dryer from anywhere and start it re-
motely. You can also control it re-
motely via the MobileStart function.
You can switch off the
setting if you do not want to operate the
dryer with your mobile device.
If Remote control is not switched on, the
app can cause the program to be can-
celed.
Use the "delay start" button to set a
time at which you wish to start the tum-
ble dryer and start the delay start (see
"Delay start/SmartStart").
The tumble dryer will then start within
the timeframe specified when it receives
your signal.
If it has not received a start signal by
the latest start time set, the tumble
dryer will start automatically.
Remote control is activated by default.
setting is only visi-
setting is set up
Remote control
SmartGrid
The
Remote control
ble if the Miele@home
and activated.
This function can be used for starting
your tumble dryer automatically at a
time when your energy costs are most
economical.
Activating SmartGrid
start button a new function. You set the
SmartGrid via the "delay start" button.
The tumble dryer will then start within
the timeframe specified when it receives
a signal from the energy supplier. If it
has not received a signal from the en-
ergy supplier by the latest start time set,
the tumble dryer will start automatically
(see "Delay start"). Please check with
your local utility provider for availability.
The SmartGrid function is switched off
by default.
Settings
setting is only visi-
setting is set up
, gives the delay
93