Select Supported Display Modes - Lenovo ThinkVision S27i-30 User Manual

Select Supported Display Modes

The display mode used by the display is controlled by the computer. Therefore, you should refer to the
computer's documentation for detailed information on how to change the display mode.
When the display mode is changed, the image size, position, and shape may change. This is normal and the
image can be readjusted using the automatic image settings and image controls.
Unlike CRT displays, which require high refresh rates to minimize flicker, LCD or flat panel technology is
inherently flicker-free.
Note: If the system has previously been used in conjunction with a CRT display and is currently configured
for a display mode outside the range of that display, you may need to temporarily reconnect the CRT display
until the system has been reconfigured; it is best to set it to 1920x1080 (100Hz), the normal display mode.
The display modes shown below are factory optimized.
Table 2-2. Display modes set by the manufacturer
Timing sequence
640× 480
640× 480
640× 480
720× 400
800× 600
800× 600
800× 600
800× 600
832× 624
1024× 768
1024× 768
1024× 768
1152× 864
1280× 1024
1280× 1024
1280× 1024
1440× 900
1600× 900
1680× 1050
1920× 1080
1366× 768
1600× 900
1920× 1080
1920× 1080
Chapter 2. Adjusting and Using the Display 2-7
Refresh rate
60Hz
72Hz
75Hz
70Hz
56Hz
60Hz
72Hz
75Hz
75Hz
60Hz
70Hz
75Hz
75Hz
60Hz
70Hz
75Hz
60Hz
60Hz
60Hz
60Hz
60Hz
75Hz
75Hz
100Hz
Signal Channel
VGA/HDMI
HDMI