Table of Contents
Advertisement
Language
Menu Horizontal Position
Menu Vertical Position
Transparency
OSD Display Time Setting
Reset All Settings
Select Supported Display Modes
The display mode used by the display is controlled by the computer. Therefore, you should refer to the
computer's documentation for detailed information on how to change the display mode.
When the display mode is changed, the image size, position, and shape may change. This is normal
and the image can be readjusted using the automatic image settings and image controls.
Unlike CRT displays, which require high refresh rates to minimize flicker, LCD or flat panel
technology is inherently flicker-free.
Note: If the system has previously been used in conjunction with a CRT display and is currently
configured for a display mode outside the range of that display, you may need to temporarily
reconnect the CRT display until the system has been reconfigured; it is best to set it to 1600x900
(60Hz), the normal display mode.
The display modes shown below are factory optimized.
Table 2-2. Display modes set by the manufacturer
Timing sequence
640x480
720x400
800x600
832x624
1024x768
1152x864
1280x1024
1440x900
1600x900
English
Franç ais
Italiano
简体中文
Españ ol
日本語
Deutsch
Русский
0-100
0-100
0-100
5-115
Cancel
Restore Factory Settings
Refresh rate（Hz)
60Hz, 72Hz, 75Hz
70Hz
56Hz, 60Hz, 72Hz, 75Hz
75Hz
60Hz, 70Hz, 75Hz
75Hz
60Hz, 70Hz, 75Hz
60Hz, 70Hz
60Hz
Chapter 2 2-6
Advertisement
Table of Contents
