Table of Contents
Advertisement
Maintaining the Display
Always turn off the power to the display before performing any maintenance work on the display.
Do not:
• Let water or liquids spill onto the display.
• Use solvents or abrasive substances.
• Use flammable cleaning materials to clean the display or any other electronic device.
• Touch the screen area of the display with sharp or abrasive objects. Such contact may cause permanent
damage to the screen.
• Use any cleaner that contains an anti-static solution or similar additive. Otherwise, the coating of the
screen area may be damaged.
Be sure to:
• Wipe the case and screen gently with a soft cloth lightly dampened in water.
• Use a damp cloth and a little flexible cleaner to remove fingerprints and grease.
Remove the Display Base and Support Arm
Step 1: Place the monitor on a flat surface.
Step 2: Loosen the screws and press and hold the quick release button on the support arm to separate the
support arm from the monitor.
Step 3: Loosen the screws to separate the base from the support arm.
Wall-mounted (optional)
Refer to the instructions attached with the base assembly. To convert the LCD from a desktop to a wall
mount, perform the following steps：
Step 1: Make sure the power button is off and unplug the power cord.
Step 2: Place the LCD face down on a towel or blanket.
Chapter 2. Adjusting and Using the Display 2-9
Advertisement
Table of Contents
