Philips M32 107E4 GS 3 Service Manual page 17

5. How to remove Main Panel (Chassis)
After remove "Main panel with bottom tray":
- Remove a screw from back of bottom tray as shown in Fig. 15.
- Remove Interface cable from bottom tray as shown in Fig. 16.
- Remove a screw from Main panel as shown in Fig. 16.
- Remove 2 screws from Main panel as shown in Fig. 17.
- Remove a screw from Main panel as shown in Fig. 18.
- Remove Main panel from bottom tray.
6. How to remove Front Control Panel (Chassis)
- Release 3 plastic claws as shown in Fig. 19.
- Remove Front control panel from Front Cabinet.
7. SERVICE POSITION
Reconnect connectors, some wires and panels (chassis),
service position can be available for DC/AC measurement
as shown in Fig. 22.
Rear view of Bottom Tray
screw
Mechanical Instructions
Fig. 15
screw
(black)
I/F cable
screw
screw
(black)
Fig. 16
Fig. 20
(plastic on bottom tray)
Fig. 17
M32 107E4 GS_3
plastic claw
Fig. 21
(copper track side view
on Main panel)
Video panel
Main panel
Fig. 22 SERVICE POSITION
17
Go to cover page
Fig. 18
screw
(black)
Fig. 19
Front control
panel
Front control
panel